Search results for "Inductively coupled plasma"
showing 10 items of 188 documents
Effect of Mn doping on the low-temperature synthesis of tricalcium phosphate (TCP) polymorphs
2019
Abstract Effect of Mn doping on the low-temperature synthesis of tricalcium phosphate (TCP) polymorphs was demonstrated in α- and β-TCP polymorphs prepared by wet precipitation method under identical conditions and annealed at 700 °C. Calcium phosphates with Mn doping level in the range from 1 to 5 mol% were studied and the formation of desired polymorph was controlled by varying Mn content in as-prepared precipitates. It was found that increasing Mn content resulted in the formation of β-TCP, while α-TCP was obtained with low Mn doping level, whereas a mixture of two polymorphs was obtained for intermediate Mn concentrations. Moreover, doping with Mn ions allowed the synthesis of β-TCP at …
HCl gas gettering of low-cost silicon
2013
HCl gas gettering is a cheap and simple technique to reduce transition metal concentrations in silicon. It is attractive especially for low-cost silicon materials like upgraded metallurgical grade (UMG) silicon, which usually contain 3d transition metals in high concentrations. Etching of silicon by HCl gas occurs during HCl gas gettering above a certain onset temperature. The etching rate as well as the gettering efficiency was experimentally determined as a function of the gettering temperature, using UMG silicon wafers. The activation energy of the etching reaction by HCl gas was calculated from the obtained data. The gettering efficiency was determined by analyzing Ni as a representativ…
Ultrasonic nebulization inductively coupled plasma optical emission spectrometry method for wine analysis
2020
Abstract A methodology was developed to determine mineral elements in wines using Inductively Coupled Plasma Optical Emission Spectrometry combined with ultrasonic nebulization. The concentration of 36 elements (Al, B, Ba, Bi, Ca, Cd, Ce, Co, Cr, Dy, Er, Eu, Fe, Gd, K, La, Lu, Mg, Mn, Mo, Na, Nd, Ni, Pb, Pr, Sb, Sc, Sm, Sr, Tb, Ti, Tm, V, Y, Yb, and Zn) was determined in 59 wine samples and used to distinguish between Brazilian and Spanish wines. The best conditions for the plasma were selected using a two-level factorial design: radiofrequency power 1500 W; plasma gas flow rate 15 L min−1; auxiliary 0.70 L min−1; and nebulizer 0.40 L min−1. An exploratory multivariate analysis by Principal…
Chemical and mineralogical analyses on stones from Sagunto Castle (Spain)
2019
Abstract For the first time, an archaeometric study was carried out on the carbonate rock ashlars of the Sagunto Castle. The studied site is one of the most important and best preserved Spanish archaeological and architectural monuments, characterized by different construction phases from the Roman period to Modern Ages. Forty samples collected from thirteen different structures of Sagunto Castle and two quarries, located in the Sagunto's hill were used for comparative purposes. The samples were analyzed by X-ray diffraction, X-ray fluorescence and inductively coupled plasma mass spectrometry to determine their mineralogical and elemental composition. The obtained data show similar chemical…
Mn/Ca in shells of Arctica islandica (Baltic Sea) – A potential proxy for ocean hypoxia?
2021
Oxygen depletion threatens an increasing number of shallow water environments, specifically habitats below the seasonal halocline in coastal settings of the Baltic Sea. To understand the natural variations of dissolved oxygen levels on seasonal and inter-annual time-scales prior to the instrumental era, high-resolution archives are urgently required. The present study evaluates the potential use of Mn/Ca values in shells of the bivalve, Arctica islandica to infer concentrations of past dissolved oxygen concentrations. This study is based on laser ablation – inductively coupled plasma – mass spectrometry (LA-ICP-MS) data of six contemporaneous specimens and demonstrates that background varia…
Green methodology for quality control of elemental content of infant milk powder
2019
Abstract A green methodology for the direct determination of elemental content in infant milk powder samples from 0 to 3 years was developed. A portable energy dispersive X-ray fluorescence (ED-XRF) tool has been used as a direct method for the quantification of five essential elements (Ca, K, Fe, Cu and Zn). For analysis pellets from 0.8 g of each sample weight were made and analyzed. Due to the high dependence of the ED-XRF signal with the sample matrix, external calibrations using cocoa powder diluted with glucose were performed. Infant milk samples were diluted with lactose and the signals were interpolated in the external calibrations. Concentrations obtained by ED-XRF were compared wi…
II) Wood pellets for home heating can be considered environmentally friendly fuels? Heavy metals determination by inductively coupled plasma-optical …
2016
Abstract The aim of the present study was to determine the concentrations of twelve potentially hazardous elements in wood pellet ashes obtained by the combustion of 13 pellet brands for sale in Italy, the impact of adding the ashes to soils and health risk of operator due to dust exposure. Samples were analysed by Inductively Coupled Plasma Optical Emission Spectrometry. The concentrations of heavy metals in ashes from stoves ranged from 0.41 to 7.2 mg kg − 1 for As, from 1.3 to 12 mg kg − 1 for Sb, from 1.8 to 12 mg kg − 1 for Zn, from 0.23 to 0.8 mg kg − 1 for Pb, from 0.18 to 2.8 mg kg − 1 for Ni, from 0.09 to 1.0 mg kg − 1 for Cd, from 0.46 to 3.4 mg kg − 1 for Cr, from 0.94 to 2.7 mg …
To incinerate or not? - Effects of incineration on the concentrations of heavy metals and leaching efficiency of post-precipitated sewage sludge (RAV…
2020
The major element and heavy metal concentrations of post-precipitated sewage sludge (PPS) and its ash residue (PPA) were determined using microwave digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS). To the best of our knowledge, this has not been previously done. In both PPS and PPA the heavy metal concentrations were clearly below the average concentrations than those encountered in sewage sludge in Europe. The leaching efficiency of the metal (Al/ Fe) used as a precipitation agent from post-precipitated sludge and its ash residue with phosphoric acid was also investigated with previously optimized leaching conditions. T…
Mineral profiles of legumes and fruits through partial least squares energy dispersive X-ray fluorescence
2019
Abstarct Energy dispersive X-ray fluorescence (ED-XRF) has been employed for the determination of mineral elements in 15 varieties of legumes and 14 cherry samples. ED-XRF signals directly obtained from pulverized samples were modelized by partial least squares (PLS) using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) of a selected number of samples, after microwave assisted acid digestion, as reference data. Models were built to predict the concentration of Al, Ca, Cu, Fe, K, Mg, P, Sr and Zn. Average concentrations predicted were 6, 930, 7, 40, 6400, 990, 2100, 4 and 15 μg g−1 for Al, Ca, Cu, Fe, K, Mg, P, Sr and Zn, respectively with relative errors from 7 till 26%. …
Determination of mercury at picogram level in natural waters with inductively coupled plasma mass spectrometry by using 3D printed metal scavengers
2019
The determination of ultra-trace concentrations of Hg in natural water samples via preconcentration using 3D printed metal scavenger technique followed by inductively coupled plasma mass spectrometry (ICP-MS) was developed. The determination of Hg in certified reference material ERM-CA615 (groundwater) was performed with high accuracy and precision resulting in recovery of 100 ± 3% and RSD <2.5%, respectively. Selective laser sintering (SLS) 3D printing was used to fabricate the scavengers using a mixture of polyamide-12 powder with thiol-functionalized silica. The preconcentration procedure is based on the adsorption of Hg on the scavenger and followed by elution of the preconcentrated Hg …